EasyManuals Logo

HPE FlexNetwork 5510 HI Series Fundamentals Configuration Guide

HPE FlexNetwork 5510 HI Series
209 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
151
Using Tcl
Comware V7 provides a built-in tool command language (Tcl) interpreter. From user view, you can
use the tclsh command to enter Tcl configuration view to execute the following commands:
•
Tcl 8.5 commands.
•
Comware commands.
The Tcl configuration view is equivalent to the user view. You can use Comware commands in
Tcl configuration view in the same way they are used in user view. For example, you can
perform the following tasks:
ï‚¡ Use the system-view command to enter system view to configure features.
ï‚¡ Use the quit command to return to the upper-level view.
Tcl usage guidelines and restrictions
When you use Tcl, follow these guidelines and restrictions:
•
You can apply Tcl environment variables to Comware commands.
•
No online help information is provided for Tcl commands.
•
You cannot press Tab to complete an abbreviated Tcl command.
•
Successfully executed Tcl commands are not saved to command history buffers.
To use Tcl to configure the device:
Task
Command
Enter Tcl configuration view from user view.
tclsh
Execute a Tcl command.
Tcl command
Return from Tcl configuration view to user view.
tclquit
NOTE:
•
The tclquit command has the same effect as the quit command in Tcl configuration view.
•
If you have used a Comware command to enter a subview under Tcl configuration view, you can
only use the quit command, instead of the tclquit command, to return to the upper level view.
Executing Comware commands in Tcl
configuration view
Follow these restrictions and guidelines when you execute Comware commands in Tcl configuration
view:
•
For Comware commands, you can enter ? to obtain online help or press Tab to complete an
abbreviated command. For more information, see "
Using the CLI."
•
The cli command is a Tcl command, so you cannot enter ? to obtain online help or press Tab to
complete an abbreviated command.
•
Successfully executed Comware commands are saved to command history buffers. You can
use the upper arrow or lower arrow key to obtain executed commands.

Table of Contents

Other manuals for HPE FlexNetwork 5510 HI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork 5510 HI Series and is the answer not in the manual?

HPE FlexNetwork 5510 HI Series Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork 5510 HI Series
CategorySwitch
LanguageEnglish

Related product manuals