132
Managing the device
This chapter describes how to configure basic device parameters and manage the device.
You can perform the configuration tasks in this chapter in any order.
Device management task list
(Required.) Configuring the device name
(Required.) Configuring the system time
(Optional.) Enabling displaying the copyright statement
(Optional.) Configuring banners
(Optional.) Setting the table capacity mode
(Optional.) Rebooting the device
(Optional.) Scheduling a task
(Optional.) Disabling password recovery capability
(Optional.) Specifying the preferred airflow direction
(Optional.) Setting the port status detection timer
(Optional.) Configuring CPU usage monitoring
(Required.) Setting memory thresholds
(Required.) Configuring the temperature alarm thresholds
(Optional.) Disabling all USB interfaces
(Required.) Verifying and diagnosing transceiver modules
(Optional.) Specifying an ITU channel number for a transceiver module
(Optional.) Restoring the factory-default settings and states
Configuring the device name
A device name (also called hostname) identifies a device in a network and is used as the user view
prompt at the CLI. For example, if the device name is Sysname, the user view prompt is <Sysname>.
To configure the device name:
1. Enter system view.
N/A
2. Configure the device name.
sysname
sysname
The default device name is
HPE
.
To Next Page
Loading...
Need help?
General