HPE FlexNetwork 5510 HI Series Fundamentals Configuration Guide

107
Step
Command
Remarks
upgrade:
boot-loader file boot
boot-package system
system-package
[ feature
feature-package&<1-
30> ] slot slot-number
{ backup | main }
• Use the image list that
the master device
started up with for
upgrade:
boot-loader update
{ all | slot
slot-number }
member devices.
• If the master device started up
with the main startup image
list, its main startup images are
synchronized to the
subordinate devices. This
synchronization occurs
regardless of whether any
change has occurred
to this
image list.
• If the master device started up
with the backup startup list, its
backup startup images are
synchronized to the
subordinate devices. This
synchronization occurs
regardless of whether any
change has occurred to this
image list.
• Startup image synchronization
will
fail if any software image
being synchronized is
corrupted or is not available.
3.
Save the
running
configuration.
save
This step makes sure any configuration you
have made can survive a reboot.
4.
Reboot the
IRF fabric.
reboot
At startup, each device reads the preloaded
Boot ROM image to RAM, and loads the
startup images.
5. (Optional.)
Verify the
software
image
settings.
display boot-loader
[
slot
slot-number ]
Verify that the current software images are
the same as the startup software images.
Displaying and maintaining software image
settings
Execute display commands in any view.
Task
Command
Display current software images and startup
software images.
display boot-loader
[
slot
slot-number ]
Display active software images.
display install active
[
slot
slot-number ] [
verbose
]
Display main startup software images.
display install committed
[
slot
slot-number ]
[
verbose
]

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English