HPE FlexNetwork 5510 HI Series Fundamentals Configuration Guide

71
Manually releasing FTP connections
Task
Command
Manually release FTP connections.
• Release the FTP connection established using a specific user
account:
free ftp user username
• Release the FTP connection to a specific IP address:
free ftp user-ip [ ipv6 ] client-address [ port port-num ]
Displaying and maintaining the FTP server
Execute display commands in any view.
Task
Command
Display FTP server configuration
and status
information.
display ftp-server
Display detailed information about online FTP users.
display ftp-user
FTP server configuration example
Network requirements
•
Configure the device as an FTP server.
•
Create a local user account with username abc and password 123456 on the FTP server.
•
Use the user account to log in to the FTP server from the FTP client.
•
Upload the file temp.bin from the FTP client to the FTP server.
•
Download the configuration file config.cfg from the FTP server to the FTP client for backup.
Figure 27 Network diagram
Configuration procedure
1. Configure IP addresses as shown in Figure 27. Make sure the IRF fabric and the PC can reach
each other. (Details not shown.)
2. Configure the FTP server:
# Examine the storage space on the member devices. If the free space is insufficient, use the
delete/unreserved file-url command to delete unused files. (Details not shown.)
Internet
PC
FTP client
1.2.1.1/16
Note: The orange line represents an IRF connection.
IRF (FTP server)
IP: 1.1.1.1/16
Master
(Member_ID=1)
Subordinate
(Member_ID=2)

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English