EasyManuals Logo

HPE FlexNetwork 5510 HI Series Fundamentals Configuration Guide

HPE FlexNetwork 5510 HI Series
209 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
123
# Perform a master/subordinate switchover.
<Sysname> issu run switchover
Upgrade summary according to following table:
flash:/feature1-r0202.bin
Running Version New Version
Alpha 0201 Alpha 0202
Slot Switchover Way
1 Active standby process switchover
Upgrading software images to compatible versions. Continue? [Y/N]: y
This operation might take several minutes, please wait...Done.
# Upgrade the feature on the original master.
<Sysname> issu commit slot 1
Upgrade summary according to following table:
flash:/feature1-r0202.bin
Running Version New Version
Alpha 0201 Alpha 0202
Slot Upgrade Way
1 Service Upgrade
Upgrading software images to compatible versions. Continue? [Y/N]: y
This operation might take several minutes, please wait...Done.
# Verify that both members are running the new image.
<Sysname> display install active
Active packages on slot 1:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/feature1-r0202.bin
Active packages on slot 2:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/feature1-r0202.bin
Software image upgrade to an incompatible version
Upgrade requirements
As shown in Figure 44, the IRF fabric has two members.
Upgrade feature1 from R0201 to R0202. The two versions are incompatible.

Table of Contents

Other manuals for HPE FlexNetwork 5510 HI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork 5510 HI Series and is the answer not in the manual?

HPE FlexNetwork 5510 HI Series Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork 5510 HI Series
CategorySwitch
LanguageEnglish

Related product manuals