HPE FlexNetwork 5510 HI Series Fundamentals Configuration Guide

50
Step
Command
Remarks
interfaces.
This command denies the access of
the user role to all interfaces if the
permit interface
command is not
configured.
4. (Optional.) Specify a list of
interfaces accessible to
the user role.
permit interface
interface-list
By default, no accessible interfaces
are configured
in user role interface
policy view.
Repeat this step t
o add more
accessible interfaces.
Configuring the VLAN policy of a user role
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter user role view.
role name
role-name
N/A
3. Enter
user role VLAN
policy view.
vlan policy deny
By default, the VLAN policy of the
user role permits
access to all
VLANs.
This command denies the access of
the user role to all VLANs if the
permit vlan
command is not
configured.
4. (Optional.) Specify a list of
VLANs accessible to the
user role.
permit vlan
vlan-id-list
By default, no accessible VLANs are
configured
in user role VLAN policy
view.
Repeat this step t
o add more
accessible VLANs.
Configuring the VPN instance policy of a user role
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter user role view.
role name
role-name
N/A
3.
Enter user role VPN
instance policy view.
vpn-instance policy deny
By default, the VPN instance policy of
the user role permits access to all
VPNs.
This command denies the access of
the user role to all VPNs if the
permit
vpn-instance
command is not
configured.
4. (Optional.) Specify a list of
VPNs accessible to the
user role.
permit vpn-instance
vpn-instance-name&<1-10>
By default, no accessible VPNs are
configured in user role VPN instance
policy view.
Repeat this step t
o add more
accessible VPNs.

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English