HPE FlexNetwork 5510 HI Series

344
Task
Command
Remarks
Establish a
connection to an
SFTP server.
• In non-FIPS mode, establish a connection to an IPv4
SFTP server:
sftp server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { 3des |
aes128 | aes256 | des } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128 | aes256 | des } |
prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] * [ dscp dscp-value | publickey keyname
| source { interface interface-type interface-number |
ip ip-address } ] *
• In FIPS mode, establish a connection to an IPv4
SFTP server:
sftp server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key rsa |
prefer-compress zlib | prefer-ctos-cipher { aes128
| aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } |
prefer-kex dh-group14 | prefer-stoc-cipher
{ aes128 | aes256 } | prefer-stoc-hmac { sha1 |
sha1-96 } ] * [ publickey keyname | source
{ interface interface-type interface-number | ip
ip-address } ] *
• In non-FIPS mode, establish a connection to an IPv6
SFTP server:
sftp ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ -i interface-type
interface-number ] [ identity-key { dsa | rsa
} |
prefer-compress zlib | prefer-ctos-cipher { 3des |
aes128 | aes256 | des } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128 | aes256 | des } |
prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] * [ dscp dscp-value | publickey keyname
| source { interface interface-type interface-number |
ipv6 ipv6-address } ] *
• In FIPS mode, establish a connection to an IPv6
SFTP server:
sftp ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ -i interface-type
interface-number ] [ identity-key |rsa |
prefer-compress zlib | prefer-ctos-cipher { aes128
| aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } |
prefer-kex dh-group14 | prefer-stoc-cipher
{ aes128 | aes256 } | prefer-stoc-hmac { sha1 |
sha1-96 } ] * [ publickey keyname | source
{ interface interface-type interface-number | ipv6
ipv6-address } ] *
Available in user view.
To establish a connection to an SFTP server in Release 1121 and later: