EasyManuals Logo

HPE FlexNetwork 5510 HI Series Security Configuration Guide

HPE FlexNetwork 5510 HI Series
551 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #471 background imageLoading...
Page #471 background image
458
# Set the password of local user userb to b12345 in plain text.
[Switch-luser-network-userb] password simple b12345
# Specify the service type as lan-access for userb.
[Switch-luser-network-userb] service-type lan-access
# Configure the authorization user profile as userb.
[Switch -luser-network-userb] authorization-attribute user-profile userb
[Switch -luser-network-userb] quit
# Add local user userc.
[Switch] local-user userc class network
New local user added.
# Set the password of local user userc to c12345 in plain text.
[Switch-luser-network-userc] password simple c12345
# Specify the service type as lan-access for userc.
[Switch-luser-network-userc] service-type lan-access
# Configure the authorization user profile as userc.
[Switch-luser-network-userc] authorization-attribute user-profile userc
[Switch-luser-network-userc] quit
8. Configure the authentication, authorization, and accounting method for local users:
# Configure ISP domain user to use local authentication and authorization without accounting
for local users.
[Switch] domain user
[Switch-isp-user] authentication lan-access local
[Switch-isp-user] authorization lan-access local
[Switch-isp-user] accounting login none
[Switch-isp-user] quit
9. Configure 802.1X:
# Enable 802.1X on GigabitEthernet 1/0/1.
[Switch] interface gigabitethernet 1/0/1
[SwitchA-GigabitEthernet1/0/1] dot1x
# Configure Ten-GigabitEthernet 1/0/1 to implement MAC-based access control (the default).
[Switch-GigabitEthernet1/0/1] dot1x port-method macbased
[Switch-GigabitEthernet1/0/1] quit
# Enable 802.1X globally.
[Switch] dot1x
Verifying the configuration
# Use the correct usernames and passwords to access the network from User A, User B, and User
C. A username must include the ISP domain name. For example, enter username usera@user and
password a12345 for User A.
# Verify that the user profiles are active for User A, User B, and User C.
<Switch> display user-profile
User-Profile: usera
Inbound:
Policy: for_usera
slot 1:
User -:
Authentication type: 802.1X

Table of Contents

Other manuals for HPE FlexNetwork 5510 HI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork 5510 HI Series and is the answer not in the manual?

HPE FlexNetwork 5510 HI Series Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork 5510 HI Series
CategorySwitch
LanguageEnglish

Related product manuals