EasyManuals Logo

Huawei AR1200 Series Configuration Guide

Huawei AR1200 Series
392 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #204 background imageLoading...
Page #204 background image
[PE1] bgp 100
[PE1-bgp] peer 4.4.4.9 as-number 200
[PE1-bgp] peer 4.4.4.9 connect-interface LoopBack 1
[PE1-bgp] peer 4.4.4.9 ebgp-max-hop 10
[PE1-bgp] ipv4-family vpnv4
[PE1-bgp-af-vpnv4] peer 4.4.4.9 enable
[PE1-bgp-af-vpnv4] quit
[PE1-bgp] quit
# Configure PE2.
[PE2] bgp 200
[PE2-bgp] peer 1.1.1.9 as-number 100
[PE2-bgp] peer 1.1.1.9 connect-interface LoopBack 1
[PE2-bgp] peer 1.1.1.9 ebgp-max-hop 10
[PE2-bgp] ipv4-family vpnv4
[PE2-bgp-af-vpnv4] peer 1.1.1.9 enable
[PE2-bgp-af-vpnv4] quit
[PE2-bgp] quit
Step 7 Verify the configuration.
After the above configuration, the CEs can learn interface routes of each other. CE1 and CE2
can ping through each other.
Consider CE1 as an example:
[CE1] display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 5 Routes : 5
Destination/Mask Proto Pre Cost Flags NextHop Interface
10.1.1.0/24 Direct 0 0 D 10.1.1.1
GigabitEthernet1/0/0
10.1.1.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
10.2.1.0/24 EBGP 255 0 D 10.1.1.2
GigabitEthernet1/0/0
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
[CE1] ping 10.2.1.1
PING 10.2.1.1: 56 data bytes, press CTRL_C to break
Reply from 10.2.1.1: bytes=56 Sequence=1 ttl=252 time=102 ms
Reply from 10.2.1.1: bytes=56 Sequence=2 ttl=252 time=89 ms
Reply from 10.2.1.1: bytes=56 Sequence=3 ttl=252 time=106 ms
Reply from 10.2.1.1: bytes=56 Sequence=4 ttl=252 time=104 ms
Reply from 10.2.1.1: bytes=56 Sequence=5 ttl=252 time=56 ms
--- 10.2.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 56/91/106 ms
There is no VPNv4 route on the ASBR. Run the display bgp routing-table label command on
the ASBR to see the label information of the routes.
Consider ASBR1 as an example:
[ASBR1] display bgp routing-table label
Total Number of Routes: 2
BGP Local router ID is 2.2.2.9
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop In/Out Label
*> 1.1.1.9 172.1.1.2 15360/NULL
*> 4.4.4.9 192.1.1.2 15361/15361
----End
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
193

Table of Contents

Other manuals for Huawei AR1200 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei AR1200 Series and is the answer not in the manual?

Huawei AR1200 Series Specifications

General IconGeneral
BrandHuawei
ModelAR1200 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals