EasyManuals Logo

Huawei AR1200 Series Configuration Guide

Huawei AR1200 Series
392 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #372 background imageLoading...
Page #372 background image
-------------------------------------------------------------------------------
Tunnel interface: Tunnel0/0/0
Created time : 2008.01.07-18:07:45
Expire time : 2008.01.07-20:07:52
-------------------------------------------------------------------------------
Protocol-addr Mask NBMA-addr NextHop-addr Type Flag
-------------------------------------------------------------------------------
172.16.1.102 32 44.4.1.2 172.16.1.102 dynamic route tunnel
-------------------------------------------------------------------------------
Tunnel interface: Tunnel0/0/0
Created time : 2008.01.07-18:11:51
Expire time : 2008.01.07-20:11:57
Step 6 Run the ping command on the spoke.
If you enable Spoke1 and Spoke2 to ping each other, you can see that Spoke1 and Spoke2 have
learned NHRP mapping entries from each other.
Run the display nhrp peer all command on Spoke1, and the command output is as follows.
[Huawei] display nhrp peer all
-------------------------------------------------------------------------------
Protocol-addr Mask NBMA-addr NextHop-addr Type Flag
-------------------------------------------------------------------------------
172.16.1.1 32 44.1.1.1 172.16.1.1 static hub
-------------------------------------------------------------------------------
Tunnel interface: Tunnel0/0/0
Created time : 2011.08.18-15:10:26
Expire time : --
-------------------------------------------------------------------------------
Protocol-addr Mask NBMA-addr NextHop-addr Type Flag
-------------------------------------------------------------------------------
172.16.1.102 32 44.4.1.2 172.16.1.102 dynamic route tunnel
-------------------------------------------------------------------------------
Tunnel interface: Tunnel0/0/0
Created time : 2011.08.18-16:09:31
Expire time : 2011.08.18-18:09:31
Run the display nhrp peer all command on Spoke2, and the command output is as follows.
[Huawei] display nhrp peer all
-------------------------------------------------------------------------------
Protocol-addr Mask NBMA-addr NextHop-addr Type Flag
-------------------------------------------------------------------------------
172.16.1.1 32 44.1.1.1 172.16.1.1 static hub
-------------------------------------------------------------------------------
Tunnel interface: Tunnel0/0/0
Created time : 2011.08.18-15:12:53
Expire time : --
-------------------------------------------------------------------------------
Protocol-addr Mask NBMA-addr NextHop-addr Type Flag
-------------------------------------------------------------------------------
172.16.1.101 32 44.3.1.2 172.16.1.101 dynamic route tunnel
-------------------------------------------------------------------------------
Tunnel interface: Tunnel0/0/0
Created time : 2011.08.18-16:10:33
Expire time : 2011.08.18-18:10:33
-------------------------------------------------------------------------------
Protocol-addr Mask NBMA-addr NextHop-addr Type Flag
-------------------------------------------------------------------------------
172.16.1.102 32 44.4.1.2 172.16.1.102 dynamic local
-------------------------------------------------------------------------------
Tunnel interface: Tunnel0/0/0
Created time : 2011.08.18-16:10:33
Expire time : 2011.08.18-18:10:33
----End
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 6 DSVPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
361

Table of Contents

Other manuals for Huawei AR1200 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei AR1200 Series and is the answer not in the manual?

Huawei AR1200 Series Specifications

General IconGeneral
BrandHuawei
ModelAR1200 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals