Figure 4-65 Connecting a drainpipe
(1) Drainpipe connector: BSPT
1/2-inch, delivered with the
smart cooling product
(2) Rigid pipe conversion
adapter: BSPP 1/2 inch,
connected to a rigid pipe with
inner screw threads
(3) Rigid pipe: made of PP-R or
other material
(4) Pagoda conversion adapter:
BSPP 1/2 inch, connected to a
pipe with inner screw threads
(5) Hose clamp (6) Hose: made of EPDM or
other material
The object shown in the broken line box is the drainpipe connector with outer screw
threads delivered with smart cooling products. The hose clamp (part 5) is used in standard
conguration. Other parts are not congured and need to be purchased onsite.
Top Pipe Routing
Step 1 Connect the check valve to the other end of the drainpipe, as shown in Figure
4-66.
FusionModule800 Smart Small Data Center
User Manual 4 Installation Guide
Issue 01 (2021-02-05) Copyright © Huawei Technologies Co., Ltd. 144
To Next Page
Loading...
Need help?
General