Item Specications
USB ● Supports USB 2.0 and 5 V, 1 A power supply.
● After installing the WiFi module, connect the WiFi module
to the ECC800-Pro using the app on the mobile phone or
pad to view the basic information about the smart module,
such as layout, resources, energy eciency, environment,
and alarms.
● You can insert a USB
ash drive to export historical data
and conguration les and import conguration les.
SW button ● Restores the default IP address, factory settings, and user
information.
● Supports RF_Z (802.15.4) networking.
Table 3-19 ECC800-Pro RF_Z parameters
Item Specications
RF_Z operating
frequency
2405–2480 MHz
RF_Z EIRP (max.) 8 dBm
Table 3-20 ECC800-Pro 4G parameters
Item
Specications
Operating frequency ● 4G: LTE-FDD, covering frequency bands B1, B3, B5,
B7, B8 and B20; LTE-TDD, covering frequency bands
B38, B40, and B41
● 3G: WCDMA, covering frequency bands B1, B5, and
B8
● 2G: GSM, covering frequency bands 900 MHz/1800
MHz
EIRP (max.) 23 dBm
Communications Port
The ECC800-Pro provides the following communications ports. Figure 3-28 shows
the pins of the RJ45 port.
FusionModule800 Smart Small Data Center
User Manual 3 System Architecture
Issue 01 (2021-02-05) Copyright © Huawei Technologies Co., Ltd. 50
To Next Page
Loading...
