N2000H V3 Appliance
User Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
You have obtained the rack number and chassis number of the N2000H V3.
You have located the N2000H V3 based on the preceding information, and labeled its
panel to prevent misoperations.
Tools
ESD gloves or ESD wrist strap
Packaging materials, for example, an ESD bag
Procedure
Step 1 Hold down the spring above the power cable using a flat-head screwdriver to eject the power
cable. See Figure 5-8.
Figure 7-8 Removing power cables
Step 2 Hold down the spring on the PSU, and pull out part of the PSU while holding the handle. See
step (1) in Figure 5-9.
Step 3 Remove the PSU from the slot. See step (2) in Figure 5-9.
To Next Page
Loading...
