Huawei N2000H V3 - Page 154

N2000H V3 Appliance
User Guide
7 Replacing Parts
Issue 04 (2018-11-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
145
Data

You have determined the position on the N2000H V3 for installing a PSU.

You have obtained the rack number and chassis number of the N2000H V3.

You have located the N2000H V3 based on the preceding information, and labeled its
panel to prevent misoperations.
Tools

ESD gloves

Packaging materials, for example, an ESD bag
Hardware
You have obtained a spare AC PSU.
Procedure
Step 1 Take the spare AC PSU out of the ESD bag.
Step 2 Push the spare AC PSU along the guide rails into a slot until you hear a sound.
The PSU spring snaps into the latch so that the PSU does not move. See Figure 5-10.
Figure 7-10 Installing an AC PSU
Step 3 Connect the power cable to the PSU. See Figure 5-11.