N2000H V3 Appliance
User Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
You have removed the riser card above the TPM. For details, see 5.12 Removing the
Riser Card.
You have removed the riser card fixing frame. For details, see 5.30 Removing the
Mainboard.
Data
You have determined the position on the N2000H V3 for installing a TPM.
You have obtained the rack number and chassis number of the N2000H V3.
You have located the N2000H V3 based on the preceding information, and labeled its
panel to prevent misoperations.
Tools
ESD gloves
M3 Phillips screwdriver
Packaging materials, for example, an ESD bag
Hardware
You have obtained a spare TPM.
Procedure
Step 1 Take the spare TPM out of the ESD bag.
Step 2 Determine the TPM position. See Figure 5-33.
Figure 7-33 Determining the TPM position
To Next Page
Loading...
