N2000H V3 Appliance
User Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
An SD card fails.
An SD card is to be replaced with a new model.
Prerequisites
Conditions
You have powered off the N2000H V3. For details, see 3.2 Powering Off.
You have removed the chassis cover from the N2000H V3. For details, see 5.6
Removing the Chassis Cover.
Data
You have determined the position on the N2000H V3 for installing an SD card.
You have obtained the rack number and chassis number of the N2000H V3.
You have located the N2000H V3 based on the preceding information, and labeled its
panel to prevent misoperations.
Tools
ESD gloves
Packaging materials, for example, an ESD bag
Procedure
Step 1 Take the spare SD card out of the ESD bag.
Step 2 Insert the SD card into the connector on the mainboard. See Figure 5-74.
To Next Page
Loading...
