N2000H V3 Appliance
User Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 9-9 Ctrl Mgmt screen
d. Set Boot device to NONE and deselect Enable controller BIOS. See Figure 7-10.
Figure 9-10 Setting parameters on the Ctrl Mgmt screen
e. Press Ctrl+S to save the settings, and press ESC to exit.
Disable the boot option for an LSISAS3008 controller card.
The methods for disabling the boot options for the LSISAS3008 controller card on the mainboard and
standard LSISAS3008 controller card in a PCIe slot are the same.
a. In the POST phase during the Appliance restart process, press Ctrl+C to open the
OptionROM screen. See Figure 7-11.
To Next Page
Loading...
