Huawei N2000H V3 - Page 82

N2000H V3 Appliance
User Guide
4 Configuring the N2000H V3
Issue 04 (2018-11-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
73
Figure 4-5 Boot information displayed for the LSISAS2308 controller card
The preceding information is for reference only. The actual information may be different from the
example.

LSISAS3008 controller card
Press Ctrl-C to Start LSI Corp Configuration Utility... is displayed during the system
startup, as shown in Figure 4-6.
Figure 4-6 Boot information displayed for the LSISAS3008 controller card
The preceding information is for reference only. The actual information may be different from the
example.

LSISAS3108 controller card
Press <Ctrl><R> to Run MegaRAID Configuration Utility is displayed during the
system startup, as shown in Figure 4-7.
Figure 4-7 Boot information displayed for the LSISAS3108 controller card
The preceding information is for reference only. The actual information may be different from the
example.
Using the iBMC Hardware Information
1. Log in to the iBMC WebUI.