Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
6 Boards
Issue 01 (2012-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
292
Figure 6-72 Appearance of the 2-Port 10GBase LAN/WAN-SFP+ + 24-Port
100/1000Base-X-SFP Integrated Line Processing Unit (LPUI-51)
Panel
Figure 6-73 shows the panel appearance of the 2-Port 10GBase LAN/WAN-SFP+ + 24-Port
100/1000Base-X-SFP Integrated Line Processing Unit (LPUI-51). Table 6-184 describes the
indicators on the panel.
Figure 6-73 Panel appearance of the 2-Port 10GBase LAN/WAN-SFP+ + 24-Port
100/1000Base-X-SFP Integrated Line Processing Unit (LPUI-51)
Table 6-184 Indicators on the panel of the 2-Port 10GBase LAN/WAN-SFP+ + 24-Port
100/1000Base-X-SFP Integrated Line Processing Unit (LPUI-51)
Component
Description
OFL button
It is an OFL button. Before removing a board, press the OFL button.
Hold the button for five seconds till the OFL indicator is on. Then, the
board can be pulled out.
OFL indicator
(red)
If the indicator is steady on, it indicates that you can remove the
board.
RUN (green)
If the indicator blinks once every 2s (0.5 Hz), it indicates that the
system is running normally. If the indicator blinks twice every 1s (2
Hz), it indicates that the system is in the alarm state.
L/A
indicator(green)
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
Interface Attributes
Table 6-185 lists the interface attributes of the 2-Port 10GBase LAN/WAN-SFP+ + 24-Port
100/1000Base-X-SFP Integrated Line Processing Unit (LPUI-51).

Huawei NetEngine40E Specifications

General

Brand	Huawei
Model	NetEngine40E
Category	Network Router
Language	English