Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
6 Boards
Issue 01 (2012-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
297
Component
Description
RUN (green)
If the indicator blinks once every 2s (0.5 Hz), it indicates that the
system is running normally. If the indicator blinks twice every 1s (2
Hz), it indicates that the system is in the alarm state.
L/A
indicator(green)
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
Interface Attributes
Table 6-192 lists the interface attributes of the 5-Port 10GBase LAN/WAN-SFP+ Integrated
Line Processing Unit B.
Table 6-192 Interface attributes of the 5-Port 10GBase LAN/WAN-SFP+ Integrated Line
Processing Unit B
Attributes
Description
Connector type
LC/PC
Optical interface
attributes
Compliant with the selected SFP+ optical module.
Working mode
Full-duplex
Frame format
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
Network protocol
IP
Table 6-193 Attributes of 10G SFP+ optical modules
Attributes
Description
Maximum
transmission
distance
0.3 km
10 km
40 km
Center
wavelength
850 nm
1310 nm
1550 nm
Minimum
transmitting
power
-7.3 dBm
-8.2 dBm
-4.7 dBm
Maximum
transmitting
power
-1 dBm
0.5 dBm
4.0 dBm
Receiving
sensitivity
-11.1 dBm
-12.6 dBm
-14.1 dBm
Overload optical
-1.0 dBm
0.5 dBm
0.5 dBm

Huawei NetEngine40E Specifications

General

Brand	Huawei
Model	NetEngine40E
Category	Network Router
Language	English