Name: Huawei NetEngine40E
Brand: Huawei
Rating: 5 (1 reviews)

To Next Page

To Previous Page

HUAWEI NetEngine40E Universal ServiceRouter

Hardware Description

6 Boards

Issue 01 (2012-09-30)

Huawei Proprietary and Confidential

315

Figure 6-84 Appearance of the 48-Port 100/1000Base-X-SFP Integrated Line Processing Unit L

Panel

Figure 6-85shows the panel appearance of the 48-Port 100/1000Base-X-SFP Integrated Line

Processing Unit L. Table 6-219 describes the indicators on the panel.

Figure 6-85 Panel appearance of the 48-Port 100/1000Base-X-SFP Integrated Line Processing

Unit L

Table 6-219 Indicators on the panel of the 48-Port 100/1000Base-X-SFP Integrated Line

Processing Unit L

Component

Description

OFL button

It is an OFL button. Before removing a board, press the OFL button.

Hold the button for five seconds till the OFL indicator is on. Then, the

board can be pulled out.

OFL indicator

(red)

If the indicator is steady on, it indicates that you can remove the

board.

RUN (green)

If the indicator blinks once every 2s (0.5 Hz), it indicates that the

system is running normally. If the indicator blinks twice every 1s (2

Hz), it indicates that the system is in the alarm state.

L/A

indicator(green)

If the indicator is on, the link is Up. If the indicator is blinking, the

data is being read or written. If the indicator is off, the link is Down.

Interface Attributes

Table 6-220 lists the interface attributes of the 48-Port 100/1000Base-X-SFP Integrated Line

Processing Unit L.

Huawei NetEngine40E Hardware Description

Other manuals for Huawei NetEngine40E