EasyManua.ls Logo

Huawei Quidway S6700 series - Page 134

Huawei Quidway S6700 series
295 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
# View detailed information about UPE B in domain 1.
[UPEB] display rrpp verbose domain 1
Domain Index : 1
Control VLAN : major 5 sub 6
Protected VLAN: Reference Instance 1
Hello Timer : 1 sec(default is 1 sec) Fail Timer : 6 sec(default is 6 sec)
RRPP Ring : 1
Ring Level : 0
Node Mode : Transit
Ring State : LinkUp
Is Enabled : Enable Is Active : Yes
Primary port : XGigabitEthernet0/0/1 Port status: UP
Secondary port: XGigabitEthernet0/0/2 Port status: UP
RRPP Ring : 2
Ring Level : 1
Node Mode : Edge
Ring State : LinkUp
Is Enabled : Enable Is Active : Yes
Common port : XGigabitEthernet0/0/1 Port status: UP
Edge port : XGigabitEthernet0/0/3 Port status: UP
RRPP Ring : 3
Ring Level : 1
Node Mode : Edge
Ring State : LinkUp
Is Enabled : Enable Is Active : Yes
Common port : XGigabitEthernet0/0/1 Port status: UP
Edge port : XGigabitEthernet0/0/4 Port status: UP
The preceding information shows that VLAN 5 is the control VLAN in domain 1, and VLANs
mapping instance 1 are the protected VLANs.
UPE B is a transit node on ring 1 in domain 1 and is in LinkUp state.
UPE B is a transit node on ring 2 in domain 1 and is in LinkUp state. XGE 0/0/1 is the public
port, and XGE 0/0/3 is the edge port.
UPE B is a transit node on ring 3 in domain 1 and is in LinkUp state. XGE 0/0/1 is the public
port, and XGE 0/0/4 is the edge port.
# View detailed information about UPE B in domain 2.
[UPEB] display rrpp verbose domain 2
Domain Index : 2
Control VLAN : major 10 sub 11
Protected VLAN: Reference Instance 2
Hello Timer : 1 sec(default is 1 sec) Fail Timer : 6 sec(default is 6 sec)
RRPP Ring : 1
Ring Level : 0
Node Mode : Transit
Ring State : LinkUp
Is Enabled : Enable Is Active : Yes
Primary port : XGigabitEthernet0/0/1 Port status: UP
Secondary port: XGigabitEthernet0/0/2 Port status: UP
RRPP Ring : 2
Ring Level : 1
Node Mode : Edge
Ring State : LinkUp
Is Enabled : Enable Is Active : Yes
Common port : XGigabitEthernet0/0/1 Port status: UP
Edge port : XGigabitEthernet0/0/3 Port status: UP
RRPP Ring : 3
Ring Level : 1
Node Mode : Edge
Ring State : LinkUp
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 3 RRPP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
124

Table of Contents

Related product manuals