EasyManua.ls Logo

Huawei Quidway S6700 series - Configuring the Interval for Sending VRRP Advertising Messages

Huawei Quidway S6700 series
295 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Applicable Environment
You can configure the related parameters of VRRP packets to optimize the functions of backup
groups.
l By increasing the interval for sending VRRP advertisement packets by the backup group,
you can reduce the network load caused by negotiation packets.
l Configurations of intervals for sending VRRP packets affect the master router election
differently in VRRP for IPv4 and VRRP6 as follows:
In VRRP for IPv4, the members in a VRRP backup group are configured with the same
interval for sending VRRP packets, which prevents multiple backup routers from being
switched to master routers simultaneously in one VRRP backup group.
In VRRP6, only can one master router work in a VRRP6 backup group in spite of the
fact that members are configured with different intervals for sending VRRP packets.
l By configuring the preemption mode and preemption delay time of the switch in the backup
group, you can increase or reduce the speed of the master/backup switchover.
l By enabling the test on the reachability of the virtual IP address, you can ping the virtual
IP address to check the network connectivity.
l By prohibiting the system from checking number of hops in VRRP packets, you can
improve the compatibility of Huawei routers with different vendors' routers.
Pre-configuration Tasks
Before adjusting and optimizing VRRP, complete the following tasks:
l Configuring network layer attributes for interfaces to connect to the network
l Configuring the VRRP backup group
Data Preparation
To adjust and optimize VRRP, you need the following data.
No.
Data
1 Interval for sending VRRP advertisement packets
2 Preemption delay of the switchs in the backup group
3 Timeout period for the master to send gratuitous ARP packets
6.7.2 Configuring the Interval for Sending VRRP Advertising
Messages
By prolonging the interval for sending VRRP advertisement packets on a virtual switch, you
can reduce the network load.
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 6 VRRP and VRRP6 Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
234

Table of Contents

Related product manuals