Huawei Quidway S6700 series User Manual

The RRPP ring is enabled.
----End
3.4.9 Enabling the RRPP Protocol
To activate an RRPP ring, you must enable RRPP and the RRPP ring.
Context
NOTE
The RRPP ring can be activated only when both the RRPP ring and RRPP protocol are enabled.
Do as follows on all switches in the RRPP domain:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
rrpp enable
The RRPP protocol is enabled.
----End
3.4.10 (Optional) Creating a RRPP Ring Group
To reduce the Edge-Hello packets to be sent and received, you can add a group of sub-rings with
the same edge nodes or assistant edge nodes to an RRPP ring group.
Context
Do as follows on the edge node or assistant edge node:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
rrpp ring-group ring-group-id
An RRPP ring group is created.
The ring group can be only created on edge nodes or assistant edge nodes.
In an RRPP ring group, the nodes of all sub-rings must have the same type. That is, all of them
must be all edge nodes or assistant edge nodes.
Step 3 Run:
domain domain-id ring { ring-id1 [ to ring-id2 ] } &<1-10>
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 3 RRPP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
69

Huawei Quidway S6700 series Specifications

General

Brand	Huawei
Model	Quidway S6700 series
Category	Network Router
Language	English