Huawei Quidway S6700 series User Manual

Step 2 Run:
vrrp version v3
The VRRP version of the current device is set to VRRPv3.
Step 3 (Optional) Run:
vrrp version-3 send-packet-mode { v2-only | v3-only | v2v3-both }
The mode for sending Advertisement packets in VRRPv3 is set.
The default VRRP version is v2. If the VRRP version is switched to v3, the default mode for
sending advertisement packets is v3-only.
----End
6.9.3 Checking the Configuration
You can view VRRP version information to check whether the configuration is successful.
Prerequisite
The configurations of VRRP version upgrade are complete.
Procedure
l Run the display vrrp protocol-information command to view VRRP version information.
----End
Example
After the configuration, run the display vrrp protocol-information command, and you can
view that the VRRP protocol version is v3 and the mode for sending Advertisement packets is
send v3 only.
<Quidway> display vrrp protocol-information
VRRP protocol information is shown as below:
VRRP protocol version : v3
Send advertisement packet mode : send v3 only
6.10 Maintaining VRRP
This section describes how to maintain VRRP. Detailed operations include deleting VRRP
statistics, and monitoring the VRRP operation status.
6.10.1 Debugging VRRP
After debugging, you need to disable the debugging function in time.
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 6 VRRP and VRRP6 Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
247

Huawei Quidway S6700 series Specifications

General

Brand	Huawei
Model	Quidway S6700 series
Category	Network Router
Language	English