Huawei Quidway S6700 series User Manual

Procedure
l Run the display vrrp [ interface interface-type interface-number [ virtual-router-id ] ]
[ brief ] command to check the VRRP status.
l Run the display vrrp6 [ interface interface-type interface-number [ vrid virtual-router-
id ] ] [ brief ] command to check the status and the configurations of a VRRP6 backup
group.
----End
Example
Run the display vrrp command or the display vrrp6 command, and you can view the Track
IF field and the IF State field. The Track IF field indicates the type and number of the tracked
interface, and the IF State field indicates the interface status, which is either Up or Down.
<Quidway> display vrrp
Vlanif100 | Virtual Router 1
State : Master
Virtual IP : 10.1.1.111
Master IP : 10.1.1.1
PriorityRun : 130
PriorityConfig : 130
MasterPriority : 130
Preempt : YES Delay Time : 0
TimerRun : 1
TimerConfig : 1
Auth Type : NONE
Virtual Mac : 0000-5e00-0101
Check TTL : YES
Config type : normal-vrrp
Config track link-bfd down-number : 0
Track IF : XGigabitEthernet0/0/2 priority reduced : 10
IF State : UP
<Quidway> display vrrp6
Vlanif10 | Virtual Router 1
State : Master
Virtual IP : FE80::1:2
Master IP : FE80::218:82FF:FED3:2AF1
PriorityRun : 200
PriorityConfig : 200
MasterPriority : 200
Preempt : YES Delay Time : 0
TimerRun : 100
TimerConfig : 100
Virtual Mac : 0000-5e00-0201
Uncheck hop limit : YES
Accept Mode : ON
Config type : normal-vrrp
Track If : XGigabitEthernet0/0/2 priority reduced : 70
IF State : UP
6.5 Configuring VRRP to Tracking the BFD Session Status
This section describes how to configure VRRP to track the BFD session status to implement fast
switchover.
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 6 VRRP and VRRP6 Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
227

Huawei Quidway S6700 series Specifications

General

Brand	Huawei
Model	Quidway S6700 series
Category	Network Router
Language	English