Huawei Quidway S6700 series User Manual

system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view of an interface at one end of the link is displayed.
Step 3 Run:
efm enable
EFM OAM is enabled on the interface.
By default, EFM OAM on an interface is disabled.
----End
4.3.6 Checking the Configuration
By viewing EFM OAM configurations, you can check whether the configurations are successful.
Prerequisite
The configurations of the EFM OAM function are complete.
Procedure
l Run the display efm { all | interface interface-type interface-number } command to check
information about EFM OAM on an interface.
l Run the display efm session { all | interface interface-type interface-number } command
to check the status of the EFM OAM protocol on an interface.
----End
Example
Run the display efm command. You can view all the EFM OAM configurations on the local
interface and part of the EFM OAM configurations on the remote interface. For example:
<Quidway> display efm interface xgigabitethernet 0/0/1
Item Value
----------------------------------------------------
Interface: XGigabitEthernet0/0/1
EFM Enable Flag: enable
Mode: active
OAMPDU MaxSize: 128
ErrCodeNotification: disable
ErrCodePeriod: 1
ErrCodeThreshold: 1
ErrFrameNotification: disable
ErrFramePeriod: 1
ErrFrameThreshold: 1
ErrFrameSecondNotification: disable
ErrFrameSecondPeriod: 60
ErrFrameSecondThreshold: 1
Hold Up Time: 0
ThresholdEvtTriggerErrDown: disable
TriggerIfDown: disable
TriggerMacRenew: disable
Remote MAC: 00e0-fc7f-724f
Remote EFM Enable Flag: enable
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 4 Ethernet OAM Configuration-EFM
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
155

Huawei Quidway S6700 series Specifications

General

Brand	Huawei
Model	Quidway S6700 series
Category	Network Router
Language	English