Received Packets : 178
Send Packets : 177
Received Bad Packets : 0
Send Bad Packets : 0
Down Count : 0
ShortBreak Count : 0
Send Lsp Ping Count : 0
Dynamic Session Delete Count : 0
Create Time : 2007/10/14 22:26:53
Last Down Time : 0000/00/00 00:00:00
Total Time From Last DOWN : ---D:--H:--M:--S
Total Time From Create : 000D:00H:03M:03S
--------------------------------------------------------------------------------
Total Session Number : 1
5.5 Configuring a BFD Session with Automatically
Negotiated Discriminators
A static BFD session with automatically negotiated discriminators is configured to check the
interworking between a device and another device on which a BFD session is dynamically
established. The static BFD session with automatically negotiated discriminators is applicable
to static routes.
5.5.1 Establishing the Configuration Task
Before configuring a static BFD session with automatically negotiated discriminators,
familiarize yourself with the applicable environment, complete the pre-configuration tasks, and
obtain data required for the configuration. This will help you complete the configuration task
quickly and accurately.
Applicable Environment
If a dynamic BFD session is used by a remote device, a static BFD session with automatically
negotiated discriminators must be created on a local device to interwork with the remote device
and support a static route to track BFD.
Pre-configuration Tasks
Before configuring a BFD session with automatically negotiated discriminators, complete the
following tasks:
l Correctly connecting interfaces
l Correctly configuring the IP address of a Layer 3 interface
Data Preparation
To complete the configuration, you need the following data.
No.
Data
1 Name of a BFD session
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 5 BFD Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
193
To Next Page
Loading...
Need help?
General
