l Run the display bfd statistics session { { all | static } [ for-ip ] | discriminator discr-
value | dynamic | peer-ip peer-ip [ vpn-instance vpn-name ] | static-auto } command to
check the statistics on a BFD session.
----End
Example
Run the display bfd configuration command, and you can view the configuration of a BFD
session.
<Quidway> display bfd configuration static name bfd1 verbose
--------------------------------------------------------------------------------
BFD Session Configuration Name : bfd1
--------------------------------------------------------------------------------
Local Discriminator : 20 Remote Discriminator : 10
BFD Bind Type : Interface(Vlanif110)
Bind Session Type : Static
Bind Peer IP Address : 11.1.1.1
Bind Interface : Vlanif110
TOS-EXP : 7 Local Detect Multi : 3
Min Tx Interval (ms) : 1000 Min Rx Interval (ms) : 1000
Proc Interface Status : Disable WTR Interval (ms) : -
Bind Application : No Application Bind
Session Description : -
--------------------------------------------------------------------------------
Run the display bfd session command, and you can view information about a BFD session.
<Quidway> display bfd session discriminator 22 verbose
--------------------------------------------------------------------------------
Session MIndex : 4096 (One Hop) State : Up Name : bfd1
--------------------------------------------------------------------------------
Local Discriminator : 22 Remote Discriminator : 11
Session Detect Mode : Asynchronous Mode Without Echo Function
BFD Bind Type : Interface(XGigabitEthernet0/0/1)
Bind Session Type : Static
Bind Peer IP Address : 224.0.0.184
NextHop Ip Address : 224.0.0.184
Bind Interface : XGigabitEthernet0/0/1
FSM Board Id : 0 TOS-EXP : 7
Min Tx Interval (ms) : 1000 Min Rx Interval (ms) : 1000
Actual Tx Interval (ms): 1000 Actual Rx Interval (ms): 1000
Local Detect Multi : 3 Detect Interval (ms) : 3000
Echo Passive : Disable Acl Number : -
Destination Port : 3784 TTL : 255
Proc Interface Status : Disable Process PST : Disable
WTR Interval (ms) : - Local Demand Mode : Disable
Active Multi : 3
Last Local Diagnostic : No Diagnostic
Bind Application : No Application Bind
Session TX TmrID : 16394 Session Detect TmrID : 16395
Session Init TmrID : - Session WTR TmrID : -
Session Echo Tx TmrID : -
PDT Index : FSM-0 | RCV-0 | IF-0 | TOKEN-0
Session Description : -
--------------------------------------------------------------------------------
Run the display bfd statistics session command, and you can view statistics a BFD session.
<Quidway> display bfd statistics session all
--------------------------------------------------------------------------------
Session MIndex : 4096 (One Hop) State : Up Name : bfd1
--------------------------------------------------------------------------------
Session Type : Static
Bind Type : IP
Local/Remote Discriminator : 22/11
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 5 BFD Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
192