Huawei Quidway S6700 series User Manual

Procedure
Step 1 Run the display dldp [ interface interface-type interface-number ] command to check the DLDP
configuration and neighbor entries.
----End
Example
Run the display dldp command, and you can view the status of an interface after the DLDP
status is reset.
<Quidway> display dldp
DLDP global status : enable
DLDP interval : 5s
DLDP work-mode : enhance
DLDP authentication-mode : simple, password is 123
DLDP unidirectional-shutdown : auto
DLDP delaydown-timer : 2s
The number of enabled ports is 2.
The number of global neighbors is: 2.
Interface XGigabitEthernet0/0/1
DLDP port state : advertisement
DLDP link state : up
The neighbor number of the port is 1.
Neighbor mac address : 0000-0000-0100
Neighbor port index : 21
Neighbor state : two way
Neighbor aged time : 13
Interface XGigabitEthernet0/0/2
DLDP port state : advertisement
DLDP link state : up
The neighbor number of the port is 1.
Neighbor mac address : 0000-0000-1100
Neighbor port index : 22
Neighbor state : two way
Neighbor aged time : 12
1.4 Maintaining DLDP
This section describes how to maintain DLDP.
1.4.1 Clearing the Statistics of DLDP
Context
CAUTION
Statistics of DLDP cannot be restored after you clear them. So, confirm the action before you
use the command.
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 1 DLDP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11

Huawei Quidway S6700 series Specifications

General

Brand	Huawei
Model	Quidway S6700 series
Category	Network Router
Language	English