Huawei Quidway S6700 series User Manual

Procedure
l For VRRP for IPv4,
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number
The interface view is displayed.
3. Run:
vrrp un-check ttl
Checking TTLs in VRRP packets is disabled.
By default, TTLs in VRRP packets are detected. You can run the undo vrrp un-check
ttl command to enable the router to check TTLs in VRRP packets.
l For VRRP6,
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number
The interface view is displayed.
3. Run:
vrrp6 un-check hop-limit
Checking the hop limit in VRRP6 packets is disabled.
By default, the hop limit in VRRP6 packets is checked. You can run the undo vrrp6
un-check hop-limit command to enable the switch to check the hop limit in VRRP6
packets.
----End
6.7.6 Configuring the Timeout Time of Sending Gratuitous ARP
Packets by the Master router
By adjusting the interval for sending gratuitous ARP packets on the master device, you can
reduce the number of VRRP packets on the network.
Context
Do as follows on the switch to send gratuitous ARP packets:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 6 VRRP and VRRP6 Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
239

Huawei Quidway S6700 series Specifications

General

Brand	Huawei
Model	Quidway S6700 series
Category	Network Router
Language	English