Huawei Quidway S6700 series - 6.8.3 (Optional) Configuring Member VRRP Backup Groups and Binding Them to the Mvrrp Backup Group

Procedure
l For VRRP for IPv4:
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number
The interface view is displayed.
3. Run:
vrrp vrid virtual-router-id virtual-ip virtual-address
A backup group is created and a virtual IP address is assigned to the backup group.
4. Run:
vrrp vrid virtual-router-id priority priority-value
The priority of the VRRP backup group is configured.
5. Run:
admin-vrrp vrid virtual-router-id
This VRRP backup group is configured as an mVRRP backup group.
l For VRRP for IPv6:
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number
The interface view is displayed.
3. Run:
vrrp6 vrid virtual-router-id virtual-ip virtual-ipv6-address [ link-
local ]
A VRRP6 backup group is created, and a virtual IPv6 address is assigned to the VRRP
backup group.
4. Run:
vrrp6 vrid virtual-router-id priority priority-value
The priority of the VRRP6 backup group is configured.
5. Run:
admin-vrrp6 vrid virtual-router-id
This VRRP6 backup group is configured as an mVRRP6 backup group.
----End
6.8.3 (Optional) Configuring Member VRRP Backup Groups and
Binding them to the mVRRP Backup Group
Through the bindings between member VRRP backup groups and the mVRRP backup group,
the state machines of member VRRP backup groups can be consistent with the state machine of
the mVRRP backup group.
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 6 VRRP and VRRP6 Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
243