Huawei Quidway S6700 series - Page 139

ring 2 node-mode assistant-edge common-port XGigabitEthernet 0/0/2 edge-
portXGigabitEthernet 0/0/3
ring 2 enable
ring 3 node-mode assistant-edge common-port XGigabitEthernet 0/0/2 edge-port
XGigabitEthernet 0/0/4
ring 3 enable
rrpp domain 2
control-vlan 10
protected-vlan reference-instance 2
ring 1 node-mode transit primary-port XGigabitEthernet 0/0/1 secondary-
portXGigabitEthernet 0/0/2 level 0
ring 1 enable
ring 2 node-mode assistant-edge common-port XGigabitEthernet 0/0/2 edge-port
XGigabitEthernet 0/0/3
ring 2 enable
ring 3 node-mode assistant-edge common-port XGigabitEthernet 0/0/2 edge-port
XGigabitEthernet 0/0/4
ring 3 enable
#
rrpp ring-group 1
domain 1 ring 2 to 3
domain 2 ring 2 to 3
#
interface XGigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 5 to 6 10 to 11 100 to 300
stp disable
#
interface XGigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 5 to 6 10 to 11 100 to 300
stp disable
#
interface XGigabitEthernet0/0/3
port link-type trunk
port trunk allow-pass vlan 6 11 100 to 300
stp disable
#
interface XGigabitEthernet0/0/4
port link-type trunk
port trunk allow-pass vlan 6 11 100 to 300
stp disable
#
return
l Configuration file of UPE D
#
sysname UPED
#
vlan batch 5 to 6 10 to 11 100 to 300
#
rrpp enable
#
stp region-configuration
instance 1 vlan 5 to 6 100 to 200
instance 2 vlan 10 to 11 201 to 300
active region-configuration
#
rrpp domain 1
control-vlan 5
protected-vlan reference-instance 1
ring 1 node-mode transit primary-port XGigabitEthernet 0/0/1 secondary-port
XGigabitEthernet 0/0/2 level 0
ring 1 enable
rrpp domain 2
control-vlan 10
protected-vlan reference-instance 2
ring 1 node-mode transit primary-port XGigabitEthernet 0/0/1 secondary-port
XGigabitEthernet 0/0/2 level 0
ring 1 enable
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 3 RRPP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
129