Huawei Quidway S6700 series - Page 144

[UPEC-mst-region] instance 2 vlan 10 11 201 to 300
# Activate the configuration.
[UPEC-mst-region] active region-configuration
[UPEC-mst-region] quit
l Configure UPE D.
# Create data VLANs 100 to 300 on UPE D.
<Quidway> system-view
[Quidway] sysname UPED
[UPED] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 5 and VLAN 6 and data VLANs 100
to 200 in domain 1.
[UPED] stp region-configuration
[UPED-mst-region] instance 1 vlan 5 6 100 to 200
# Create instance 2 and map it to control VLANs VLAN 10 and VLAN 11 and data VLANs 201
to 300 in domain 2.
[UPED-mst-region] instance 2 vlan 10 11 201 to 300
# Create instance 3 and map it to control VLANs VLAN 20 and VLAN 21 in domain 3.
[UPED-mst-region] instance 3 vlan 20 21
# Activate the configuration.
[UPED-mst-region] active region-configuration
[UPED-mst-region] quit
l Configure UPE E.
# Create data VLANs 100 to 300 on UPE E.
<Quidway> system-view
[Quidway] sysname UPEE
[UPEE] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 20 and VLAN 21 and data VLANs 100
to 300 in domain 3.
[UPEE] stp region-configuration
[UPEE-mst-region] instance 1 vlan 20 21 100 to 300
# Activate the configuration.
[UPEE-mst-region] active region-configuration
[UPEE-mst-region] quit
l Configure UPE F.
# Create data VLANs 100 to 300 on UPE F.
<Quidway> system-view
[Quidway] sysname UPEF
[UPEF] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 20 and VLAN 21 and data VLANs 100
to 300 in domain 3.
[UPEF] stp region-configuration
[UPEF-mst-region] instance 1 vlan 20 21 100 to 300
# Activate the configuration.
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 3 RRPP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
134