EasyManuals Logo

Huawei Quidway S6700 series User Manual

Huawei Quidway S6700 series
295 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
5. Set the Delay Down timer.
6. Set the mode of disabling the interface when a unidirectional link is detected.
7. Set the authentication mode of DLDP packets.
Data Preparation
To complete the configuration, you need the following data:
l Type and number of each interface
l Interval for sending Advertisement packets
l Value of the Delay Down timer
Procedure
Step 1 Configure the interface on Switch A to work in non-auto negotiation mode.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] interface xgigabitethernet 0/0/1
[SwitchA-XGigabitEthernet0/0/1] undo negotiation auto
[SwitchA-XGigabitEthernet0/0/1] quit
Step 2 Enable DLDP globally
[SwitchA] dldp enable
Step 3 Enable DLDP on the interface.
[SwitchA] interface xgigabitethernet 0/0/1
[SwitchA-XGigabitEthernet0/0/1] dldp enable
[SwitchA-XGigabitEthernet0/0/1] quit
Step 4 Configure DLDP to work in enhanced mode.
[SwitchA] dldp work-mode enhance
Step 5 Set the interval for sending Advertisement packets to 80 seconds.
[SwitchA] dldp interval 80
Step 6 Set the timeout interval of the DelayDown timer to 4 seconds.
[SwitchA] dldp delaydown-timer 4
Step 7 Configure DLDP to automatically shut down the interface where a unidirectional link is detected.
[SwitchA] dldp unidirectional-shutdown auto
Step 8 Set the authentication mode of DLDP packets to simple password authentication and set the
password to 123456.
[SwitchA] dldp authentication-mode simple 12345
Repeat the preceding steps on Switch B.
Step 9 Verify the configuration.
After the configuration, run the display dldp command in the interface view, and you can find
that the DLDP status of the interface is advertisement.
[SwitchA] display dldp interface xgigabitethernet 0/0/1
Interface XGigabitEthernet0/0/1
DLDP port state: advertisement
DLDP link state: up
The neighbor number of the port is: 1.
Neighbor mac address:0018-2000-0083
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 1 DLDP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S6700 series and is the answer not in the manual?

Huawei Quidway S6700 series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S6700 series
CategoryNetwork Router
LanguageEnglish

Related product manuals