Huawei V300R005 - Configuring Authentication Mode; Configuring Authentication Password; Setting Username and Password for AAA Local Authentication

5 User Management
Quidway NetEngine80
Configuration Guide - Basic Configurations
5-24 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
5.6.2 Configuring Authentication Mode
Do as follows on the router that the user logs in to:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface [ ui-type ] first-ui-number [ last-ui-number ]
The user interface view is displayed.
Step 3 Run:
authentication-mode { aaa | password | none }
The user authentication mode is configured.
----End
5.6.3 Configuring Authentication Password
Do as follows on the router that the user logs in to:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface [ ui-type ] first-ui-number [ last-ui-number ]
The user interface view is displayed.
Step 3 Run:
set authentication password { cipher | simple } password
The authentication password is configured.
----End
The default authentication mode is the password authentication.
5.6.4 Setting Username and Password for AAA Local
Authentication
Do as follows on the router that the user logs in to:
Step 1 Run:
system-view