Huawei V300R005 - Configuring AUX User Interface

5 User Management
Quidway NetEngine80
Configuration Guide - Basic Configurations
5-10 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
5.2.6 Checking the Configuration
Run the following commands to check the previous configuration.
Action Command
View the information about the
user interface use.
display users [ all ]
View physical attributes and
configurations of the user interface
display user-interface console 0 [ summary ]
View the local user list
display local-user
View online users
display access-user
5.3 Configuring AUX User Interface
5.3.1 Establishing the Configuration Task
Applicable Environment
When the user needs to maintain a remote router, AUX user interface is required.
Pre-configuration Tasks
Before configuring AUX user interface, complete the following tasks:
z
Powering on the router
z
Connecting the PC with the router properly
Data Preparation
Before configuring AUX user interface, you need the following data.
No. Data
1 Transmission rate, flow-control mode, checksum mode, stop bit, and data bit
2 Idle timeout period for user, screen length of terminal, and the size of history
command buffer
3 User priority
4 Modem attributes
5 (Optional) Auto-execute commands
6 User authentication method, user name, and password