Huawei V300R005 - Configuring Local User Authority for FTP Directory; Configuring Local User Status

5 User Management
Quidway NetEngine80
Configuration Guide - Basic Configurations
5-28 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
local-user user-name service-type { bind | ftp | ppp | ssh | telnet | terminal | web
| x25-pad } *
The service type of the local user is configured.
----End
By configuring the service type of the local user, you can manage the user based on service types.
5.7.4 Configuring Local User Authority for FTP Directory
Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
local-user user-name ftp-directory directory
The local user authority for the FTP directory is configured.
----End
5.7.5 Configuring Local User Status
Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run: