Huawei V300R005 - Configuring the Connection between the Remote Terminal and the Router; Establishing the Physical Connection; Initializing and Configuring the Modem on the Interface

2 Establishment of the Configuration Environment
Quidway NetEngine80
Configuration Guide - Basic Configurations
2-6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
No. Data
1 Type of terminals
2 Terminal communication parameters
3 Modem communication parameters
Configuration Procedures
To configure the router by dialup through the AUX port, complete the following procedures.
No. Procedure
1 Establishing the Physical Connection
2 Initializing and Configuring the Modem on the Interface
3 Configuring the Connection Between the Remote Terminal and the Router
4 Logging In to the Router
2.4.2 Establishing the Physical Connection
Do as follows on the login router:
Step 1 Connect the Modem with the PC and the network.
Step 2 Connect the Modem with the router through the AUX port and the network.
----End
2.4.3 Initializing and Configuring the Modem on the Interface
Do as follows on the router:
z
Configure the authentication mode of login user
z
Configure the authority limitation of login user
For details, refer to the Quidway NetEngine80 Core Router Configuration Guide - Security.
2.4.4 Configuring the Connection Between the Remote Terminal
and the Router
Do as follows on the terminal PC:
Step 1 Run the terminal emulation program on the PC (such as Windows XP HyperTerminal) to
enter the Connection Description window.
Step 2 Enter the connection name of the PC and the router, such as Dial.
Step 3 Click OK to enter the Connect To window.