Huawei V300R005 - Scheduled Telnet Disconnection; Checking the Configuration

Quidway NetEngine80
Configuration Guide - Basic Configurations 9 Telnet and SSH
Issue 04 (2009-12-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-9
9.2.4 Scheduled Telnet Disconnection
Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface [ ui-type ] first-ui-number [ last-ui-number ]
The user interface view is displayed.
Step 3 Run:
idle-timeout minutes [ seconds ]
The scheduled Telnet disconnection is enabled.
----End
9.2.5 Checking the Configuration
Run the following commands to check the previous configuration.
Action Command
Check the connection status of the current
user-interface.
display users
Check the connection status of all user-interfaces.
display users all
Check the status of all the established TCP
connections.
display tcp status
Run the display tcp status command to view TCP connection status. When ESTAB indicates
that the TCP connection is established.
<Quidway> display tcp status
TCPCB Tid/Soid Local Add:port Foreign Add:port VPNID State
39952df8 36 /1509 0.0.0.0:0 0.0.0.0:0 0 Closed
32af9074 59 /1 0.0.0.0:21 0.0.0.0:0 14849 Listening
34042c80 73 /17 10.164.39.99:23 10.164.6.13:1147 0 Established