Quidway NetEngine80
Configuration Guide - Basic Configurations 5 User Management
Issue 04 (2009-12-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-27
No. Data
5 The maximum number of accessing local users
Configuration Procedures
To configure local user management, complete the following procedures.
No. Procedure
1 Creating Local User Account
2 Configuring the Service Type of the Local User
3 Configuring Local User Authority
4 Configuring Local User Status
5 Configuring Local User Priority
6 Configuring Access Restriction of the Local User
7 Checking the Configuration
5.7.2 Creating Local User Account
Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
local-user user-name password { simple | cipher } password
The local user account is created.
----End
5.7.3 Configuring the Service Type of the Local User
Do as follows on the router:
Step 1 Run:
system-view
To Next Page
Loading...
