Huawei V300R005 - Viewing Online Help of the FTP Command; Uploading or Downloading Files; Managing Directories

Quidway NetEngine80
Configuration Guide - Basic Configurations 8 FTP, TFTP and XModem
Issue 04 (2009-12-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-11
The passive file transfer mode is configured.
----End
8.4.5 Viewing Online Help of the FTP Command
Do as follows on the router that serves as the client:
Step 1 Run:
ftp [-a source-ip-address | -i { interface-name | interface-type interface-num } ] [ host
[ port-number ] ] [ vpn-instance vpn-instance-name ]
The router is connected to the FTP server, and the FTP client view is displayed.
Step 2 Run:
remotehelp [ command ]
The online help of the FTP command is displayed.
----End
8.4.6 Uploading or Downloading Files
Do as follows on the router that serves as the client:
Step 1 Run:
ftp [-a source-ip-address | -i { interface-name | interface-type interface-num } ] [ host
[ port-number ] ] [ vpn-instance vpn-instance-name ]
The router is connected to the FTP server, and the FTP client view is displayed.
Step 2 Upload or download files.
z
Run:
put local-filename [ remote-filename ]
The local file is uploaded to the remote FTP server.
z
Run:
get remote-filename [ local-filename ]
The FTP file is downloaded from the FTP server and saved to the local file.
----End
8.4.7 Managing Directories
Do as follows on the router that serves as the client:
Step 1 Run:
ftp [-a source-ip-address | -i { interface-name | interface-type interface-num } ] [ host
[ port-number ] ] [ vpn-instance vpn-instance-name ]
The router is connected to the FTP server.