Huawei V300R005 - Configuring the Source Address of TFTP Client; Downloading Files through TFTP; Uploading Files through TFTP

Quidway NetEngine80
Configuration Guide - Basic Configurations 8 FTP, TFTP and XModem
Issue 04 (2009-12-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-15
Configuration Procedures
No. Procedure
1 Configuring the source address of TFTP Client
2 Downloading Files Through TFTP
3 Uploading Files Through TFTP
8.5.2 Configuring the source address of TFTP Client
Do as follows on the router that serves as the TFTP server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
tftp client-source {-a source-ip-address | -i { interface-name | interface-type
interface-num }}
The source address of TFTP client is started.
----End
8.5.3 Downloading Files Through TFTP
Do as follows on the router that serves as the TFTP client:
Step 1 Run:
tftp [-a source-ip-address | -i { interface-name | interface-type interface-num } ]
tftp-server get source-filename [ destination-filename ]
The router is configured to download files through TFTP.
----End
8.5.4 Uploading Files Through TFTP
Do as follows on the router that serves as the TFTP client:
Step 1 Run :
tftp [-a source-ip-address | -i { interface-name | interface-type interface-num } ]
tftp-server put source-filename [ destination-filename ]
The router is configured to upload files through TFTP.
----End