Huawei V300R005 - Resetting the Device and Switching over the Channel; Displaying the Device Information

10 Router Maintenance
Quidway NetEngine80
Configuration Guide - Basic Configurations
10-6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
10.3.3 Resetting the Device and Switching over the Channel
Run one of the following commands to enter a view as you need:
z
To reset the device at the specified slot, run:
reset slot slot-id
z
To reset the router, run:
reboot whole router
z
To switch over the communication channel, run:
switch communication-channel { ipc [ slot-id ] } { a | b }
10.3.4 Displaying the Device Information
After the configuration, run the following display commands in any view to view the
operation status of the device.
Action Command
Display the basic information of the
device.
display device [ pic-status | slot-id ]
Display the self-test information of
the device.
display selftest [ slot-id ]
Display the version of the device. display version [ slot-id ]
Display the environment
information.
display environment
Display the alarm or status
information.
display alarm record { slot-id | all }
Display the information on the CPU
usage.
display cpu-usage [ slave | slot slot-id ]
display cpu-usage { entry-number [ offset ]
[ verbose ] | slave | slot slot-id }
display cpu-usage configuration [ slave ]
Display the communication-channel
information.
display communication-channel [ { ipc { state |
statistic } | dem { link-status
| state | statistic }}
[ slot-id ] ]
Display the startup type and time of
the LPU.
display lpu { slot-id | all } startup