Huawei V300R005 - Figure 9-9 Networking Diagram of Accessing the SSH Server through Other Port Numbers

Quidway NetEngine80
Configuration Guide - Basic Configurations 9 Telnet and SSH
Issue 04 (2009-12-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-43
negotiating the algorithm, generating the session key, authenticating, sending session request
and performing the interactive session.
The networking diagram is shown in Figure 9-9.
Figure 9-9 Networking diagram of accessing the SSH server through other port numbers
SSH Server
Netw ork
SSH Client
legal user
SSH Client
setting port
SSH Client
attacher
Configuration Roadmap
The configuration roadmap is as follows:
1. Configure both Client001 and Client002 on the SSH server.
2. Generate the local key pair on STelnet client and SSH server respectively. The SSH
server monitors the port number.
3. Generate the local key pair on client and SSH server respectively.
4. Generate the RSA public key on SSH server and bind the RSA public key of SSH client
to Client002.
5. Enable STelnet and SFTP service on the SSH server.
6. Configure service mode and authorization directory of the SSH user.
7. Client001 and Client002 log in to the SSH server through STelnet and SFTP
respectively.
Data Preparation
To complete the configuration, you need the following data:
z
Name and the authentication mode of SSH users
z
Password or the RSA public key of the SSH user
z
Name of the SSH server
z
Number of the port monitored by the SSH server
Configuration Procedure
Step 1 Generate a local key pair on the server.
<Quidway> system-view