Quidway NetEngine80
Configuration Guide - Basic Configurations 8 FTP, TFTP and XModem
Issue 04 (2009-12-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-7
No. Data
1 FTP username and password
2 The file directory authorized to the FTP user
3 The timeout time of the FTP server
Configuration Procedures
To configure an FTP ACL, you need to take following steps.
No. Procedure
1 Enabling the FTP Server
2 Configuring the Basic ACL
3 Configuring the Basic FTP ACL
8.3.2 Enabling the FTP Server
Do as follows on the router that serves as the FTP server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ftp server enable
The FTP server is started.
----End
8.3.3 Configuring the Basic ACL
Do as follows on the router that serves as the FTP server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
acl acl-number
The ACL view is displayed.
Step 3 Run:
To Next Page
Loading...
