Huawei V300R005 - Changing Login Users; Disconnecting from the FTP Server

Quidway NetEngine80
Configuration Guide - Basic Configurations 8 FTP, TFTP and XModem
Issue 04 (2009-12-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-13
The specified directory or file on the local FTP server is displayed.
z
Run:
delete remote-filename
The specified file on the FTP server is deleted.
----End
8.4.9 Changing Login Users
Do as follows on the router that serves as the client:
Step 1 Run:
ftp [-a source-ip-address | -i { interface-name | interface-type interface-num } ] [ host
[ port-number ] ] [ vpn-instance vpn-instance-name ]
The router is connected to the FTP server.
Step 2 Run:
user user-name [ password ]
The current login user is changed and the user logs in again.
----End
8.4.10 Disconnecting from the FTP Server
Do as follows on the router that serves as the client:
Step 1 Run the following commands according to different configurations.
z
Run:
bye
Or
quit
The client router is disconnected from the FTP server.
Return to the user view.
z
Run:
close
Or
quit
The client router is disconnected from the FTP server.
Return to the FTP view.
----End