Huawei V300R005 - Copying the System Software and License to the Slave MPU; Checking the Configuration

11 System Software Upgrade
Quidway NetEngine80
Configuration Guide - Basic Configurations
11-4 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
11.2.3 Copying the System Software and License to the Slave
MPU
Do as follows on the router to be upgraded.
Step 1 Run:
copy source-filename slave#flash:/destination-filename
The system license is copied to the Flash Memory of the slave MPU.
Step 2 Run:
copy source-filename slave#hd:/destination-filename
The system software is copied to the hardware of the slave MPU.
----End
If you need to copy multiple files to the Flash Memory of the slave MPU, repeat the preceding steps.
11.2.4 Checking the Configuration
Run the following commands to check the previous configuration.
Action Command
Check the file information on the of the master MPU.
dir flash:
dir :
Check the file information on the
of the slave MPU.
dir flash:
dir slave#:
After uploading the files, run the preceding commands and you can view the information of the
uploaded files. For example, check the file information on the Flash Memory of the master MPU.
<Quidway> dir flash
Directory of flash:/
0 drw- - Dec 13 2005 14:09:50 log
1 -rw- 4333 Aug 31 2006 09:35:12 private-data.txt
2 -rw- 972 Dec 24 2005 16:34:58 vrpcfg.zip
3 -rw- 14490 Aug 30 2006 03:36:02 paf.txt
4 -rw- 6165 Aug 30 2006 03:36:24 license.txt
5 -rw- 817148 Aug 30 2006 11:04:12 NE.bin
15875 KB total (5032 KB free)
The vrpcfg.zip is the default configuration file of the system.