5 User Management
Quidway NetEngine80
Configuration Guide - Basic Configurations
5-30 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
Action Command
Check the attribute of the local
user.
display local-user [ domain domain-name | user-name
user-name ]
Run the display local-user command. You can view the status and type of the local user.
<Quidway> display local-user
----------------------------------------------------------------
User-name State Type CAR Access-limit Online
----------------------------------------------------------------
aaa@163 Active All Dft 1 0
aaa Active All Dft No 0
----------------------------------------------------------------
Total 2,2 printed
Run the display local-user username user-name command. You can view details of the AAA
local user, such as the user level, FTP authorization directory.
<Quidway> display local-user username aaa
--------------------------------------------------------------
User-name : aaa
Password :huawei
State : Active
Service-type : All
ACL-number : -
User-CAR : -
Idle-cut : No
Access-limit : No
Online-number : 0
MAC-address : -
User-level : 0
FTP-directory : -
Call-number : -
Callback-check : Yes
Callback-number : -
------------------------------------------------------------
5.8 Configuration Examples
After the following two configuration examples are completed, the current user VTY0 cannot
run commands at levels higher than two. Ensure that you can log in to the router through other
methods to delete the configuration.
To Next Page
Loading...
