Huawei V300R005 - Configuring the User Interface Priority; Setting Console Terminal Attributes

Quidway NetEngine80
Configuration Guide - Basic Configurations 5 User Management
Issue 04 (2009-12-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-7
When the user logs in to a router through a console interface, the configured attributes for the
console interface on the super terminal should accord with the attributes of the interface on
the router. Otherwise, the user cannot log in to the router.
5.2.3 Setting Console Terminal Attributes
Do as follows on the router that the user logs in to:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface [ ui-type ] first-ui-number [ last-ui-number ]
The user interface view is displayed.
Step 3 Run:
Shell
The terminal service is started.
Step 4 Run:
idle-timeout minutes [ seconds ]
The timeout period is set.
By default, idle timeout period for users on the user interface is 10 minutes.
Step 5 Run:
screen-length screen-length
One-screen length of the terminal screen is set.
Step 6 Run:
history-command max-size size-value
The buffer of the history command is set.
----End
5.2.4 Configuring the User Interface Priority
Do as follows on the router that the user logs in to:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface [ ui-type ] first-ui-number [ last-ui-number ]
The user interface view is displayed.